1.27mm Box Header Connector/SMT/H5.7
| Item No | 3232XXMXXXBK00X0X |
| Type | Box Header Connector |
| Order of units | 10-100Pin |
| Interval | 1.27mm |
| Rated current | 1.0A |
| Rated voltage | 250V AC/DC RMS |
| Installation method | SMT |
Box Header Connector
Box Header Connectorconsists of a square shaped plastic socket and several neatly arranged square pins. The difference between a simple Box Header Connector and Eiector Header Connector is that the simple cow horn has removed the buckles on both sides. According to requirements, there are three commonly used specifications for the peripheral dimensions of Jian Niu connectors: 1.27 spacing, 2.0 spacing, and 2.54 spacing; Depending on the spacing, the diameter of the square needles used also changes accordingly. The contact surface between the bottom and PCB board can be designed as SMT mount or DIP direct insertion 180 degrees. Function: After welding the simple ox onto the PCB board, connect the corresponding specifications of IDC cables, and then form the circuit connection method required by the designer with other circuits. Usually used to transmit control signals and weak currents.
Underlying parameter
| Item No | 3232XXMXXXBK00X0X |
| Type | Box Header Connector |
| Order of units | 10-100Pin |
| Interval | 1.27mm |
| Cztegory | Male |
| Installation method | SMT |
Engineering parameters
| Rated Current | 1.0A | AMP |
| Contact Resistance | 20 | mΩ Max |
| Withstand Voltage | 250 | AC / DC |
| Insulation Resistance | 1000 | mΩ Min |
| Operating Temperature | -55 to 105 | ° C |
| Contact Material | Phosphor Bronze | |
| Contact Plating | Gold | |
| Insulator Material | Polyester(UL94-0) | |
| Housing | PBT | |
| Max. Processing Temp. | 245±5℃ for 30-60 seconds;245±5℃ for 10 seconds |
