2.0mm Pin header/SMT/1 row/1 plastic/H1.0/H1.5/H2.0/H2.5/H3.0/H4.0
| Item No | 13XX11XXXNXXMXXXX0X |
| Type | Pin Header Connector |
| Order of Units | 02~40Pin |
| Interval | 2.0mm |
| Rated Current | 2.0A |
| Rated voltage | 250V AC/DC |
| Installation Method | SMT |
Pin Header
This type of connector is widely used in PCB circuit boards in electronics, appliances, and instruments. Its function is to serve as a bridge between blocked or isolated circuits within the circuit, responsible for the task of current or signal transmission. Usually used in conjunction with the busbar to form a board to board connection, or in conjunction with electronic wiring harness terminals to form a board to line connection. It can also be independently connected with a dry board to board. Due to the different specifications required by different products, there are various models and specifications of the busbar connectors. According to the standard classification of busbar connectors in the electronics industry, they can be roughly divided into five types: 2.54mm, 2,00mm, 1.27mm, 1.00mm, 0.8mm. There are single and double busbar connectors according to the number of rows, Three rows, etc.
Underlying parameter
| Item No | 13XX11XXXNXXMXXXX0X |
| Type | Pin Header |
| Order of Units | 02~40Pin |
| Interval | 2.0mm |
| Type | male |
| Installation Method | SMT |
Engineering parameters
| Rated Current | 2.0A/250V | AMP |
| Contact Resistance | 20 | mΩ Max |
| Withstand Voltage | 500 | AC / DC |
| Insulation Resistance | 1000 | mΩ Min |
| Operating Temperature | -40 to 105 | ° C |
| Contact Material | Phosphor Bronze | |
| Contact Plating | Copper alloy | |
| Insulator Material | PA6T | |
| Housing | PPS | |
| Max. Processing Temp. | 260℃ for ±5 -5 seconds; |
