2.54mm Ejector Header Connector/Short ear buckle/90°
| Item No | 3310XXRXXXBXXXX |
| Type | Ejector Header Connector |
| Order of units | 6-64Pin |
| Interval | 2.54mm |
| Rated current | 3.0A |
| Rated voltage | 250V AC/DC |
| Installation method | 90 ° plug-in board |
Ejector Header Connector
Ejector Header Connector can be divided into 1.27 spacing, 2.0 spacing, and 2.54 spacing in terms of pin spacing. They can also be divided into straight pin, curved pin, and patch Ejector Header Connector in terms of pin insertion method. The name of Ox horn connector mainly comes from the double Ox horn buckle on its interface, which is used to firmly fix the IDC cable interface on the Ox horn connector (this is also the main difference between Ox horn connectors and simple Ox horn connectors), The function of the horn connector in the PCBA is to connect IDC cables of corresponding specifications, connect them with other circuit modules, and form the circuit functions that the designer needs to achieve. Generally, its purpose is to transmit control signals and weak currents for the PCBA board.
Underlying parameter
| Item No | 3310XXRXXXBXXXX |
| Type | Ejector Header Connector |
| Order of units | 6-64Pin |
| Interval | 2.54mm |
| Cztegory | Male |
| Installation method | 90 ° plug-in board |
Engineering parameters
| Rated Current | 3.0A | AMP |
| Contact Resistance | 20 | mΩ Max |
| Withstand Voltage | 250 | AC / DC |
| Insulation Resistance | 1000 | mΩ Min |
| Operating Temperature | -55 to 105 | ° C |
| Contact Material | Phosphor Bronze | |
| Contact Plating | Gold | |
| Insulator Material | Polyester(UL94-0) | |
| Housing | PBT | |
| Max. Processing Temp. | 260±5℃ for 10 seconds;260±5℃ for 10 seconds |
